BH LYNX 6 27,5"CARBON 9.7
LIGHTER THAN EVER
LYNX 6 CARBON ELEGANT AND STYLISH LINES
from a single piece of 100% monocoque carbon, offering uniformity to the entire frame and eliminating critical areas as there are no connection points between the tubes. The Lynx 6 was developed with HM (High Module T40, T30 and T24 of Toray) technology in order to offer increased rigidity with the same weight.
LYNX 6 ALLOY LIGHTWEIGHT AND RAPID
The frame of the new Lynx 6 Alloy has been manufactured in triple thickness aluminium alloy 7005-T4 and T6 that guarantees its strength, lighter weight and complete rigidity. The steering tube, the pedal box, the bridge, the cam, the feet are made from cold forged 7075 aluminium and provides for these areas a better weight/resistance ration due to these being the most critical points of the frame.
SPLIT PIVOT TECHNOLOGY
Split Pivot is a floating suspension system developed by BH based on traction, pedalling efficiency, handling and the bicycle’s rigidity. This system allows for separate action on three forces produced on the bicycle: pedalling, braking and suspension. The obtained result is maximum pedalling efficiency with consistent and progressive suspension. The advanced rear suspension of the Lynx allows it to have a greater range while being very lightweight.
INTERNAL CABLE GUIDING
The guiding system of cables and derailleurs is completely internal in the Lynx 6 range. It is also equipped with an internal guide in the adjustable seatpost. It incorporates the standard ISCG 05 integrated chain guide.
DIRECT MOUNT DERAILLEUR. EASY ADJUSTMENT, TOTAL PRECISION
The direct anchoring of the Direct Mount derailleur guarantees simple adjustment and maximum degrees of reliability and precision. Being fully integrated in the frame means offers an increased rigidity and an absolute precision when shifting gears. Its design simplifies its adjustment. The anchoring of the Direct Post Mount rear brake, including detachable screws, eases adjustment and reliability.
Рама: Lynx 6 Carbon 27,5"
Вилка: Rock Shox Pike RC SA Air 160mm
Задний амортизатор: Fox Float DPS
Подвеска: SPLIT PIVOT
Манетки: Sram XO1
Тормоза: MAGURA MT5
Задний переключатель скоростей: Sram XO1
Передний переключатель скоростей: Sram XO1
Кассета: Sram 11sp 10/42
Система шатунов: Sram X1
Цепь: Sram X
Вынос: BH SUPER-LITE
Руль: BH SUPER-LITE LOW RIZER
Подседельный штырь: KS Lev Supra
Седло: PROLOGO X8
Рулевая чашка: INTEGRATED
Колеса: DT SWISS M1700 SPLINE
Покрышки: MICHELIN WILD RACER 2.35
Зажим: BH SUPER-LITE
Вес: 12.40 KG.